WFI Distribution Loop System

WFI Distribution Loop System have the following special features :

• Material of construction - SS 316L.
• Internals electro polished to Ra < 0.8.
• Externals Mechanically polished to 180 grit finish.
• Welding technique - Automatic Orbital Welding.
• All interconnections through triclovers.
• All valves are of self draining type.
• All gaskets are of Teflon.
• Dead leg not more than 6d for d < 30mm.
• Dead leg not more than 3d for d >/=30mm.
• Entire installation will be completely drainable.
• Slope of the low point must be 1: 100 minimum.

Following accessories are supplied as a part of the WFI Distribution Loop System:

• WFI circulation pump.
• Saunders diaphragm valves.
• Temperature Indicator cum Controller.
• Flow Indicator cum Totalizer.
• Conductivity Indicator cum Controller.
• Sanitary Diverting Valve.
• Back Pressure Valve.
• Panel board with Data Logger, printer and alarm system