SHILPI EPOXY RICH PRIMER is a two pack curing system gives protection to freshly shot blasted steel surface.the zinc pigment in dry film provides an excellant protection to steel surface tank,pipelines and plant component in both interior and exterior exposed conditions.it also provides cathodic protection to to steel and givesgood resistance to undercoating damage areas.It can also be overcoated with wide range of coats.
» Color | » Grey |
» Composition | » Epoxy Resin Pigmented with Zinc Dust |
» Mixing Ratio | » 4:1 by volume |
» Recommended DFT | » 30 Microns. |
» Zinc dust content of DFT | » 90 ± 2% |
» Maturation time | » 10 to 15 min.r HD= not more than 12hrs |
» Tempt. Resistance | » 300º C by heat. |
» Drying Time | » SD=10-15min HD= 1-2hrs full cure:7days. |
» Pot Life | » 4-6hrs at 30º C |
» Self life | » 12months provided components are unmixed store in secured area |
» Flash Point | » Not below 25º C |
» Covering Capacity | » 0 to 25sq mtr/ltr/coat at recommended DFT |
» Application | » Airless Spray or by brush. |