⇒ Auto Transformer provides voltage to the motor at start.
⇒ Appropriate lower voltage tapping –customized as per the application – is provided to the motor.
⇒ After the motor has attained significant torque changeover from Auto Transformer to On Line takes place.
⇒ Interlocking between stator and rotor as per ISS: 8544 (part III).
⇒ Offers improvements in reliability as compared to L.R.S..
⇒ Low maintence; incorporates switching through contactors.
⇒ Smooth acceleration of the slip-ring induction motor.
⇒ Provision of tripping automatically the Starter in case of overload, due to which it gives relief from the worry of burning the motor.
⇒ If there is phase short circuit or earthing in starter outgoing, then MCB of starter will trip automatically due to which fault doesn’t multiply.
⇒ Due to presence of rubber gasket starter is completely protected from dust, mud, water.
⇒ Provision of Starting Starter automatically when all the 3 phases are available, due to which maximum voltage is always available & will give freedom from starting & stopping again-n-again.
⇒ Due to presence of rubber gasket is completely protected from dust, mud & water.
⇒ Incoming & outgoing (3phase, Multi lock type) terminals are provided separately.
SYEMCO® Impex is into design and manufacturing of high end technically superior motor starting solutions. The group has over 40 years of experience in supplying specialized motor starting solutions with a vast technical know-how in the electrical field.
The promoters of Syemco® Group now has had also diversified themselves in the field of ON LINE SOFTWARE APPLICATIONS related to Medical Awareness, Astrology, Palmistry , Vastu & Self Assessment Games. For further details you may visit www.ocmeys.com
Benefits of SYEMCO® Products :
Reduces Electrical and Mechanical Stresses to the machines/electrical installations.
EliminatesTransient / reduces dip in Electrical Installation.
Avoids motors burning as motor is connected in Delta from the starting itself.
Power Savings as compared to Star Delta Starters.
Withstand high initial starting torques with MD Control.
Ideally suitable for high friction and torque applications as loads are connected to DG/Turbine power supplies.