Checkweigher System, Optiweigh, Model IW 6000
is primarily used for weighing and segregating the packs for low or high weight, during the packing.
The checkweigher is easy to integrate in any existing line and occupies less space.
The system consists of Inlet, Weighing and Exit conveyor. The exit conveyor has a suitable rejection mechanism that works on pneumatic supply.
Typically this system is useful in Food, FMCG & Pharmaceutical sectors.
» Technical Specifications
Note:
(a) (*) Depends on pack dimension, product's nature, speed, field conditions, transportation behaviour of the product etc.,
(b)Due to continuous development in the product, the specifications stated above subject to change without prior notice.
(c) (**) System length can change depending on the rejection device selected.
| Optiweigh | IW 6000 |
| weighing range | 30 - 6000 g |
| Throughput | upto 75 Packs/min., Pack size dependant Pack size dependant |
| Accuracy * | ± 3 g |
| Product Length | 30 - 550 mm |
| Product Width | 30 - 360 mm |
| Product Height | 10 - 360 mm |
| Belt Speed | upto 35 mtrs/min |
| Operating Height | 700 + 100 mm. Other Please Specify. |
| System Length ** | 2100 mm |
| Interface-optional | RS 232, Enternet |
| Power Supply | 230 VAC single phase, 50 HZ, 450 VA |
| &Temperature Range | 5° C - 50° C |
| Pressurized Air | 4.5 - 6 Bar |
| MOC | MS painted |
| Weighing Device | Load Cell |
| Rejection type | Pusher type. Others as per product/application requirement. |
• OptiWeigh IW 600
• OptiWeigh IW 1500
• OptiWeigh IW 3000
• OptiWeigh IW 6000
• OptiWeigh IW 15000
• OptiWeigh IW 25000
• Belt Feed Weigher
• Gravomatric Weigh Filler
• Screw Feed Weigher
