Duplex Controller

FEATURES

• Installation can be carried out, as two independent lifts as controller of both lifts are independent.
• There is no chance of both lifts down, as either of the lift continues to serve as simplex.
• Lift till the time breakdown of other lift is attended.
• This feature is especially useful as electronics of both lifts are separate and information between the two is hand-shacked.
• This unique and exclusive design is made after getting vast experience in different duplex controller techniques and detailed field report analysis.
• In old controller techniques one controller used to control two lifts and this was giving problems of installation, application and maintenance.
• In old controller techniques one controller used to control two lifts and this was giving problems of installation, application and maintenance.
• You can put even two opposite shafts into Duplex, as physical location of two lifts is not important for duplex operation in our design.
• You can have independent LOP (HOP)'s installed for lifts having longer distances between their shafts.
• Button pressed at one LOP (HOP) will show indication in other LOP (HOP) button.
• You can put gong in two ways...
  a) Independent Gongs on all floors, and
  b) On car top i.e. Single Gong common for all floors.Shaft Harness
• Wiring harnesses are prepared for all types of buildings and all type of controllers. With few details like floor heights, overhead, length in m/c room and distance from duct, etc. a harness for entire building can be built.
• With the following features Lutag Wire Harnesses are becoming more customer-friendly...
• Reduces the precious wiring time and labour.
• There is no scope of error in wiring connection.
• Skilled technician not required for wiring as well as commissioning.
• Saves the wire wastage.