Insulation Plates
BILZ insulating plates are highly developed materials designed to combat problems caused in many industrial sectors by vibrations and structure-borne noise. Made from an exactly defined combination of nitrile rubber, cork particles and cross-linked polyester-fibre, this high-grade compound material possesses all the physical and mechanical properties. One major advantage of this new compound material is its resistance to modern cooling lubricants; the mountings can thus also be used in oil sumps without any problems. Particularly worth mentioning are the superb "compression set" values. These are extremely important, for example, if modern machine tools are to be insulation-mounted while ensuring long-term geometric precision. 8 different types of plates provide the technically optimal solution to almost any vibration problem. The primary aim in the development of these was to cater for the variatum kinematic characteristics for e.g. lathes, milling machines and grinding machines, as well as those of presses an feed presses!
Resistance to Aging
The service life of these mounting plates is nearly unlimited if the load values are observed. No permanent deformation.
Extremely high degree of resistance to conventional oils, grease, acids, etc.
Completely resistant to cooling emulsions, thus allowing machine mounting in oil sumps.
Resistance to Temperature
+ 120° to – 20° Celsius
Group: lubricants
Roller and friction bearing greases, gear lubricant grease
Group: fuels and motor fuels
Petrol (gasoline), diesel, heating fuel, aviation gasoline, special motor fuels
Group: purifiers (watery solutions)
Washing and Rinsing agents, wetting agents, dilute acids, dilute alkaline solutions, salt solutions.
Group: synthetic lubricants
Polyalkylenglycols, ester of a carbonic acid, radiator antifreeze
Group: purifiers
Chlorinated hydrocarbons, petroleum ether/benzine, cold purifiers
Group: hardly inflammable pressure liquids
Oil in water emulsions, water in oil emulsions, water polymeric solutions
Group: Mineral Oils
Cooling lubricants mixable with water, ATF (Automatic Transmission Fluid), cooling lubricants, water mixable anticorrosive oils, sliding belt oils, compressed air oils, lubricants, thermal oils, filter oils, rolling oils, gear lubricant oils for cars, brake fluids and mineral oil basis.
Type B 4*
Range of application: Very universal.
Can be used for machine tools, plastic and printing machines. Extremely well suited to machines with a tendency to "migrate".
Type B 0
Range of application: Without profile.
Very high level constancy.Particularly for machines with little rigidity such as: lathes, machining centers, transfer lines etc
Type B 6
Range of application:
Insulating plate with extremely high loadability coupled with maximum level constancy.
E.g. for very heavy and long bedded machining centers, transfer lines etc.
Type B 5
Range of application: For machines with high dynamic disturbance properties and only a small support plate, e.g. presses, stamping presses, shears etc.
Type B 30
Range of application: Soft kind without any profile.
Specially suited for effective insulation of lighter presses, punching machines etc. on upper floors.
Type B 32
Range of application: Soft kind similar to B30, but with higher load capability.
For medium to big presses, punching presses etc. Very high insulation!
Type B 30 W
Range of application: Very soft kind for mainly passive insulation. High insulation effect due to low frequency tuning. E.g.for measuring and testing machines, scales, microscopes and grinders.
Type B 13 W
Range of application: Special kind for highest insulation values, can be stacked up to 5 times. Tuning up to approx. 8 Hz.
Recommended as so-called plate-set for foundation insulations.
Type BS / BN / BR-7*
Range of application: BILZ anti-skid and spacer plates.
No vibration insulation!
