Features
Hydraulic System
- Differential two stage intervene pump for minimum power consumption.
- 24 volt D.C. Coil for all solenoid directional control valve for longer life and reliability
Programmable Logic Control
Which user a programmable memory for internal storage of instructions for implementing specific function such as logic, sequencing, timing counting and arithmetic to control through digital or analog input modules various type of machines or processes.
Advantages
- Proven solid reliability.
- High flexibility (No control Contractor wiring)
- Near zero maintenance down time.
- Saving valuable space and cost.
Die Closing End
- Hydraulically operated double toggle system.
- Variable die opening and closing speed.
- Mechanical locking for tie bar nuts.
- Variable die opening stroke for wide range of die height.
Injection End
- 3 phase injection system with independent control for speeds, pressures and timings.
- Slow first phase to close pouring hole without, spurting metal.
- Third phase with a final intensified squeeze pressure applied before and during Solidification metal.
- Hard chrome Plated & Ground Tie Bars.
Specification
| Locking force |
tons |
80 |
120 |
180 |
| Injection force adjustable (With intensifier) |
tons |
11.5 |
-- |
22.5 |
| Hydraulic ejections force |
tons |
4 |
-- |
10 |
| Die mounting plates H x V |
mm |
530x530 |
-- |
680x690 |
| Space between tie bars H x V |
mm |
350x350 |
-- |
450x450 |
| Tie bar diameter |
mm |
60 |
-- |
80 |
| Max die height |
mm |
400 |
-- |
600 |
| Min die height |
mm |
150 |
-- |
200 |
| Die opening stroke |
mm |
350 |
-- |
460 |
| Injection plunger stroke |
mm |
250 |
-- |
300 |
| Ejector stroke adjustable |
mm |
60 |
-- |
100 |
| Free cycle time |
sec |
3 |
-- |
3.5 |
| Motor capacity |
kW |
7.5 |
-- |
18.5 |
| Machine area |
m |
4 x 1.1 |
-- |
5 x 1.3 |
| Machine weight |
tons |
3.6 |
-- |
5.5 |
| Capacity of oil tank |
liters |
300 |
-- |
400 |
| System Pressure |
kg/cm.2 |
100 |
-- |
150 |
Production Data
| S- 80 |
| Plunger die mm |
35 |
40 |
45 |
50 |
55 |
| Shot capacity Aluminum kg* |
0.43 |
0.56 |
0.71 |
0.88 |
1.06 |
| Maximum Injection Pressure kg/cm² |
1200 |
920 |
730 |
590 |
490 |
| Nominal casting area at above Injection pressure cm² |
66 |
87 |
110 |
135 |
163 |
| S-120 |
| Plunger die mm |
| Shot capacity Aluminum kg* |
| Maximum Injection Pressure kg/cm² |
| Nominal casting area at above Injection pressure cm² |
| S-180 |
| Plunger die mm |
40 |
50 |
60 |
70 |
80 |
85 |
| Shot capacity Aluminum kg* |
0.7 |
1.1 |
1.6 |
2.1 |
2.7 |
3 |
| Maximum Injection Pressure kg/cm² |
1790 |
1145 |
795 |
585 |
445 |
400 |
| Nominal casting area at above Injection pressure cm² |
100 |
157 |
226 |
307 |
405 |
450 |