Our Products - Chlorinated Rubber Finish Paint
TECHNICAL DATA SHEET |
Product Description |
This is a Chlorinated Rubber finishing top coat based on specially made chlorinated rubber resin. |
Recommended Uses |
This product has good resistance to inorganic acids, alkalis, etc.and good water resistance hence it is recommended to be used in chemical environments . |
PRODUCT SPECIFICATION |
Mixing Ratio |
One pack |
Colour |
Any inert shade as per customer’s requirement. |
Finish |
Matt to Glossy |
Pot Life |
N.A. |
Volume Solids |
35 to 40 % depending on the shade |
Flash point |
More than 25 ºC |
Recommended DFT |
25-30 microns per coat |
Covering Capacity |
11 to 15 sq.mtrs / ltr |
(Theoretical) |
- |
Drying Time |
Surface dry – 15 to 20 mins at 30 oC & 65 % Relative Humidity
Hard Dry – 6 to 8 hrs at 30 oC & 65 % Relative Humidity |
Recoating Time |
Min 4 hrs. at 30 ºC & 65 % Relative Humidity Max - None |
Method of Application |
Brush / Airless Spray |
Thinner recommended |
‘ Spectrahlor’ Thinner |
Shelf life |
12 months under normal storage conditions in original sealed containers.
|
Surface Preparation |
Surface should be free from mill scales , rust , oil , grease , moisture and any other foreign matter and properly primed.
|
Remarks 1. Application Data |
Method |
Pressure ( Atm) |
Nozzle |
Thinner |
Thinner volume |
Brush |
- |
-
|
Spectrachlor Thinner |
0 – 5 % |
Airless Spray |
4-5 |
0.013 inch to 0.021 inch
|
Spectrachlor Thinner |
0 – 5 % |
2. Don’t use below 10 �C
3. Stir well before and while using .
4. Film thickness other than indicated also possible.
Safety Precautions : |
Provide sufficient ventilation while working with solvent based paints in confined spaces and stagnant air. |
Keep the material away from heat , spark and direct flame |
Avoid inhalation of solvent vapour or paint mist by using facial mask .Use goggles and gloves to protect against direct contact of paint with
skin and eyes. |
In case of contamination , rinse with fresh running water and seek medical help at once. |
Follow local & national safety rules. |
Special Comments : |
Thinner consumption and actual coverage of paint depends on the site conditions. |
Stir the paint well before painting and while painting if necessary. |
Material should be stored at 30 �C temperature in dry place.
|