Our Products - Chlorinated Rubber Primer
| TECHNICAL DATA SHEET |
| Product Description |
This is a Chlorinated Rubber Primer based on specially made chlorinated rubber resin. |
| Recommended Uses |
This product has good resistance to inorganic acids, alkalis, etc.and good water resistance hence it is recommended to be used in chemical environments . |
| PRODUCT SPECIFICATION |
| Mixing Ratio |
One pack |
| Colour |
Redoxide , Grey |
| Finish |
Matt to Glossy |
| Pot Life |
N.A. |
| Volume Solids |
35 to 40 % depending on the shade |
| Flash point |
More than 25 ºC |
| Recommended DFT |
25-30 microns per coat |
| Covering Capacity |
11 to 15 sq.mtrs / ltr |
| (Theoretical) |
- |
| Drying Time |
Surface dry – 15 to 20 mins at 30 oC & 65 % Relative Humidity
Hard Dry – 6 to 8 hrs at 30 oC & 65 % Relative Humidity |
| Recoating Time |
Min 4 hrs. at 30 ºC & 65 % Relative Humidity Max - None |
| Method of Application |
Brush / Roller / Conventional Spray / Airless Spray |
| Thinner recommended |
‘ Spectrahlor’ Thinner |
| Shelf life |
12 months under normal storage conditions in original sealed containers.
|
| Surface Preparation |
Surface should be free from mill scales , rust , oil , grease , moisture and any other foreign matter and properly primed.
|
| Remarks 1. Application Data |
| Method |
Pressure ( Atm) |
Nozzle |
Thinner |
Thinner volume |
| Conven. Spray |
4 – 5 |
-
|
Spectracoat Q.D.Thinner |
10 – 15 % |
| Brush |
- |
-
|
Spectrachlor Thinner |
0 – 5 % |
| Airless Spray |
4-5 |
0.013 inch to 0.021 inch
|
Spectrachlor Thinner |
0 – 5 % |
2. Don’t use below 10 �C
3. Stir well before and while using .
4. Film thickness other than indicated also possible.
| Safety Precautions : |
| Provide sufficient ventilation while working with solvent based paints in confined spaces and stagnant air. |
Keep the material away from heat , spark and direct flame |
| Avoid inhalation of solvent vapour or paint mist by using facial mask .Use goggles and gloves to protect against direct contact of paint with
skin and eyes. |
In case of contamination , rinse with fresh running water and seek medical help at once. |
| Follow local & national safety rules. |
| Special Comments : |
| Thinner consumption and actual coverage of paint depends on the site conditions. |
Stir the paint well before painting and while painting if necessary. |
| Material should be stored at 30 �C temperature in dry place.
|
