Super Plast is into the manufacture and marketing of various types of fill designs suitable for different water quality. Film Fills improve water distribution by cutting the water stream as it descends through the cooling tower fill pack. The counterflow film fills feature a bonded end with dedicated bond points for added strength and durability. The high thermal performance and low-pressure drop are balanced by appropriating the engineered microstructure design and maintaining the highest manufacturing standards. Film Fills are the most efficient filling media available for cooling towers. The usage of film fills – in both counterflow and crossflow cooling towers allows relatively smaller sized towers to cool an equivalent amount of water compared to cooling towers using splash fills. This results in the saving of not only capital costs for a new tower but also reduces operational costs on account of lower height and hence lower pumping costs. Film Fills work on the principle of offering heat exchange by spreading the falling water droplets into a thin molecular film where the air can effectively contact the entire surface of the water film to carry away heat and mass.

Advantages

• Minimum resistance to air flow
• Good distribution of water leads to turbulent mixing of air and water to maximize heat transfer.
• Reduced fill height and greater cooling capacity results in lower power consumption.
• Erosion and rotting resistant and long lasting (10-12 years of service time in good quality water)
• Self-supporting, high strength and self-extinguishing characteristics
• Resistance to weather exposure (fungii/oxidation) ; Nearly impervious to chemical degradation by Alkali, acid, grease, fats, oils and biological attack
• Easy to glue at site, reduces transportation cost.