FLOW (SOLID / LIQUID)

Flow measurements for diverse applications, liquids & solids, featuring different measurement principles for clean & dirty medium, part filled or full filled pipes, water & waste water.

BTU Meter / Energy Meter
Energy Consumption measurement in heating & cooling systems for Hydronics in Building Management / HVAC on chilled or heated water loop.

Clamp-on Ultrasonic
We offer a range of clamp-on ultrasonic flowmeters which provide highly accurate measurement of liquids and gases. This minimizes installation time and maintenance expenses. They are available as configurable systems as well as check metering kits.

Coriolis Mass Flow
Our range of full-bore Coriolis mass flowmeters are suitable for measuring liquids and gases. The Coriolis measuring principle is used in a wide range of different branches of industry, such as Food, chemicals, petrochemicals, oil and gas. Coriolis flowmeters can measure virtually all fluids: cleaning agents, solvents, fuels, crude oil, vegetable oils, animal fats, silicon oils, alcohol, fruit juices, toothpaste, ketchup, mayonnaise, gases or liquid gases. The measurement is independent of changes in process conditions and due to this versatility the meter is easy to install and also recognized for its accuracy. We can spec the unit required to the individual application. CIP & SIP capable.

Magnetic
Electromagnetic flowmeters are suitable for measuring the flow of almost all electrically conducting liquids, pastes and slurries. Magmeters are used in virtually all Industries and a well established method of measurement. Talk to us today about your application. Sanitary / Dairy Process Connections Tri Clamp, BS4825 / ISO 2852, DIN 11851.

Turbine meters with single rotor or dual rotor. Lo Flo
The highly precise Stainless Steel Turbine Meters have been designed to measure the flow of fluids & gases. Pressure, Viscosity & temperature compensation provided unbeatable repeatability & linearity. The turbine meters can be mounted in any orientation, either horizontal or vertical pipes.

Low cost precision turbine meter for measurement of flow rates smaller than 5 l/min.

The gas series has been designed for precise flow measurement of all compressible gases, while also providing a very low pressure drop, flow measurement at densities between 0.16 & 240 kg/m3 for flow rates of 0.1 upto 180 l/s.

Dual Rotor turbine meters which is highly resistant to external vibration & minimises space making it a good choice for hydraulic systems, aerospace applications. Qualifications of jet engines & aircraft components in test calibrators, measurement of propellant consumption in aircraft.

Rugged meters for harsh environments, high corrosive media or for food & pharmaceutical industry with 3-A sanitary standard approval.

Solutions for flow measurement of Demineralised (DM) Water, alkaline solutions, oils / salads, fuel oil, beverage, water solutions or for fuel or fuel consumptions. Especially ideal for washing machines, dish washers, coffee machines, laser cooling systems, solar plants, bakery & steam cooking machines in large kitchen plants.

Differential Pressure with Orifice Assembly
Variable Area Flow Meter
The Variable Area Flow measurement method allows fluids, corrosive fluids, liquids, compressed air & gases volume streams to be determined. A moving sharp-edged orifice is located within the piston assembly, forming an annular opening with the contoured metering cone. The piston assembly carries a cylindrical PPS/ceramic magnet that is magnetically coupled to an external indicating magnet, which moves precisely in direct response to movement of the piston therefore providing a visual display of the flow rate.

Sewage Flow, Partial Flow – Polluted Medium
Flowmetering systems for polluted water & waste water based on ultrasonic doppler or the crosscorrelation method.

Ultrasonic
We can offer overhead ultrasonic open channel flow meters which include MCERTS approval. These are suitable for continuous influent and effluent flow measurement in open channels. Flow monitoring is key throughout Utility Networks and we can offer solutions to suit most requirements.

Insertion Type Ultrasonic
Contact Type Insert Flowmeters for clean & slightly polluted water utilising transit time.

AVFM and Cross Correlation WRAS Approved
Area Velocity Measurement is used where partial flow is required in a pipeline or Cross sectional Area such as channels, part-filled and full pipes up to 12 m width or diameter. Talk to us today about your requirement.