Protectant (P)

Bumper Renewer (Black)

Description:
A black coloured water-based paint which gives very good adhesion to plastics and gives satin gloss & "new like” appearance for faded bumpers and trim which is black in colour. It is specially prepared with acrylic binder and wax. Very easy to use and dries fast.

Key Features:

  • Black gel.
  • Ready-to-use.
  • Satin gloss.
  • Neutral scent.
  • Contains Wax.
  • Highly Durable.

Key Benefits:

  • Effectively shines and restores faded bumpers and trim.
  • Water-based formulation penetrates surface, enhancing its durability.
  • Satin gloss gives deep and rich shine.

How to Use:
For Bumper & Trim:

  • Clean and sand with 320 grit size paper followed by 600 grit size paper.
  • Clean with Jopasu G.P.C.
  • Apply the Bumper Renewer with Do all Sponge pad in one direction.
  • Repeat step three.
  • After drying apply Trim N’ Tire Protectant.
  • Wipe excess with Jopasu Microfiber.

Products Required: Do all Pad, G.P.C; 320 grit & 600 grit Emery Paper, Magic Wipe, Trim Dressing or Protectant and Agro sprayer.
Packing Available: 1 Ltr

Trim N Tire Protectant

Description:
A extremely durable, ready to use, solvent-based, blue coloured dressing having rose scent, contains aminosiloxane which gives high gloss, and protects vinyl & rubber from cracking, fading and discoloration that enables washing for few times.

Key Features:

  • Blue liquid.
  • Ready-to-use.
  • High gloss.
  • Rose scent.
  • Contains polymer & silicone.
  • Highly durable, detergent resistant up to few washes.

Key Benefits:

  • Effectively shines and protects rubber, plastic and vinyl surfaces.
  • Solvent-based formulation penetrates surface, enhancing durability.
  • High gloss gives deep and rich shine.

How to Use:
For Exterior :

  • Moisten a clean applicator pad and wipe on vinyl, plastic and rubber surfaces.
  • Allow to dry, or wipe dry with a clean cloth.

For Tires:

  • Spray product on applicator pad.
  • Apply product to tire with pad.
  • Allow product to thoroughly dry before moving the vehicle.
  • Improper application of solvent-based dressings may result in product "sling”, which can stain the painted surfaces.
  • Jopasu assumes no liability for damage resulting from improper application.
  • Not recommended for use on engines due to potential flammability.

Product Required: Do all Pad, Magic Wipe and Agro Sprayer.
Packing Available: 500ml & 2.5 Ltr

Ultracoat (Step 3)

Description:
A P.T.F.E. fortified paint sealant containing artificial gloss enhancers and antistatic polymer which protects the vehicle's finish from sun, salt, grease, tar, acid rain and industrial fallout, while sealing in a deep and durable shine.

Key Features:

  • Milky white lotion
  • Contains antistatic polymer
  • Enhances gloss and protects.
  • Extremely durable
  • P.T.F.E. fortified

Key Benefits:

  • Part of Jopasu Ultracoat One Year Warranty Program.
  • Lotion formulation easy to apply and remove which saves time and effort.
  • Polymer chemically bond to paint creating extremely durable protective layer.
  • Produces a deep and rich shine.
  • Protects finish from sun's ultra-violet rays.

How to use:
With Orbital Buffer:

  • Shake container before and during use.
  • Start with the roof and proceed to the hood, trunk and sides.
  • Apply product to the buffer's moistened polishing bonnet.
  • Apply product evenly over painted surface with buffer, and allow it to dry to haze.
  • Remove residue with a clean, dry bonnet.

By Hand:

  • Shake container before and during use.
  • Start with the roof, and proceed to the hood, trunk and sides.
  • Apply product evenly over painted surface with a clean, moist applicator sponge, and allow it to dry to haze.
  • Remove residue with a clean, soft polishing cloth.
  • Ensure painted surfaces are cool to the touch before applying product
  • Do not apply in direct sunlight

Product Required:

By Hand:
Wax Applicator & Magic Wipe.
By Machine: Terry pad, Magic Pad & Buffer.
Packing Available: 500ml & 2.5 Ltr

Underbody Coating (Black)

Description:
A unique blend of petroleum hydrocarbon and resins that weatherproof the vehicle's under-chassis and help block out annoying road noise. Warranty is available through JOPASU Warranty Program.

Key Features:

  • Black liquid.
  • Weatherproofs & reduces road noise.
  • Ready to use.

Key Benefits:

  • Part of Jopasu Warranty Program.
  • Extends vehicle life by weather proofing and insulating vehicle's under-body.
  • Improves driving experience by reducing road noise.
  • Resists abrasion, thus increasing length of protection.

How to Use:

  • Ensure vehicle is clean and dry before applying product.
  • Apply product with a spray gun designed for undercoating application.
  • The type of gun used will depend on the size of container the product is drawn from.
  • Apply product in well-ventilated area.

Spray the following:

  • All exposed sheet metal (gas tank, etc).
  • Body floor supports.
  • Wheel housings.
  • Gravel shields.
  • Inner boxed sections.
  • Brake and gas lines.
  • Wheel well and lip areas (apply lightly).

Ensure the following parts are not sprayed:

  • Any part of the drive train (engine, transmission, drive shaft).
  • Any part of the exhaust system.
  • Brake pads.
  • Rotors.

Product Required: Underbody Gun, Terry Wipe, Thinner & Compressor.
Packing Available: 1 Ltr & 20Ltr

Vinyl Protectant

Description:
A extremely durable, ready to use, thick, water based, light green coloured dressing having banquet scent, contains aminosiloxane which gives high gloss, and protects vinyl from cracking, fading and discoloration.

Key Features:

  • White liquid.
  • Ready to use.
  • High gloss.
  • Banquet scent.
  • Contains detergent resistant polymer.
  • Non-greasy.

Key Benefits:

  • Effectively shines and protects rubber, plastic and vinyl surfaces.
  • Water-based formulation contains no harsh solvents.
  • High gloss gives deep and rich shine.

How to Use:
For Interior & Exterior:

  • Moisten a clean applicator pad and wipe on vinyl, plastic and rubber surfaces.
  • Allow to dry, or wipe dry with a clean cloth.

For Tires:

  • Spray product on applicator pad.
  • Apply product to tyre with pad.
  • Allow product to thoroughly dry before moving vehicle.

For Engine:

  • Spray entire engine using a consistent pattern to ensure even coverage.
  • Wipe down with a soft cloth.
  • For best results, always apply to clean, dry surfaces.
  • Do not apply to seat bottoms, steering wheel or foot pedals since product can cause these surfaces to be slippery

Product Required: Do all Pad, Magic Wipe and Agro Sprayer.
Packing Available: 500ml & 2.5 Ltr

Ultrapack Kit

This kit contains following items:

  • Bio Car Shampoo       - 140 ml
  • De-Oxidizer (Step 1)       - 500 ml
  • Super Glaze (Step 2)       - 500 ml
  • Ultracoat (Step 3)       - 500 ml
  • Vinyl Protectant (Step 4)       - 500 ml
  • Rubber Protectant (Step 5)       - 500 ml
  • Sponge       - Two
  • Chrome N’ Polish       - 140 ml

How to Use:

  • Wash the car with Car shampoo (which is ultra-concentrated car shampoo).
  • With Orbital Buffing Machine, apply De-Oxidizer (Step 1) and after sometime, buff it to clean. (For details see De-Oxidizer page)
  • With Orbital Buffing Machine, apply Super Glaze (Step 2) and after sometime, buff it to clean. (For details see Super Glaze page)
  • With Orbital Buffing Machine, apply Ultracoat (Step 3) and after sometime, buff it to clean. (For details see Ultracoat page)
  • Use Vinyl Protectant with sponge to give gloss effect to the vinyl parts.
  • Use Rubber Protectant with sponge to give a good shine to all rubber parts.

Coverage - Cooling 6 to 7 cars in a kit.

Product Required: Orbital Buffing Machine, Magic Pad and Agro Sprayer.