• Precise distance measuring up to 13 m
• Virtually independent of the object condition
• Highest resolution up to 2 mm
• Extremely compact housing
• Completely integrated evaluation electronics
• High ambient light immunity
• High temperature stability

OADM 12
	Characterstics Smallest laser distance sensor Measuring range can be limited Sealed housing Compact and smooth surface Suppression of dirt and cleaning agents	Dimension:12,4 x 37 x 34,5 mm measuring Distance:16 ... 120 mm Resolution:2 μ m
response time: < 0,9 ms	Output: 4 ... 20 mA 0 ... 10 V
Specific Characterstics	Incorrect measurements are suppressed, the output remains at the last measured value for up to 30 ms

OBDM 12
	Characterstics : Difference sensor for sensing steps, changes in distance, distance windows or tolerance ranges	Dimension: 12,4 x 37 x 34,5 mm measuring Distance: 16 ... 120 mm
response time: < 1 ms	Output: PNP NPN
Specific Characterstics	Step height, differences ranges to be evaluated set using Teach-in Teach-in using cabling or button

OADM 13
	Characterstics : Large measuring distance in a small housing Measuring range can be Spot or line laser beam	Dimension: 13,4 x 48,2 x 40 mm measuring Distance: 50 ... 550 mm Resolution: 10 μm
response time: < 0,9 ms	Output: 4 ... 20 mA 0 ... 10 V RS 485 / RS 232
Specific Characterstics	Incorrect measurements are suppressed, the output remains at the last measured value for up to 30ms

FADK 14
	Characterstics : Red light point source LED Measuring range can be Limited IO-Link	Dimension: 14,8 x 43 x 31 mm measuring Distance: 50 ... 400 mm Resolution: 0,1 mm
response time: < 5 ms	Output: 4 ... 20 mA 0 ... 10 V
Specific Characterstics	An alarm output indicates an incorrect measurement or if the object is outside of the measuring range Information on due maintenance can be retrieved

OADM 20
	Characterstics : Measuring range can be limited Spot or line laser beam	Dimension: 20,6 x 65 x 50 mm measuring Distance: 30 ... 1000 mm Resolution: 4 μm
response time: < 0,9 ms	Output: 4 ... 20 mA 0 ... 10 V RS 485
Specific Characterstics	An alarm output indicates an incorrect measurement or if the object is outside of the measuring range Input for synchronizing Laser diode can be switched on/off

OADM 20
	Characterstics : Line beam Increased vibration immunity Increased ambient light immunity 100 klux Suitable for outdoor applications	Dimension: 20,6 x 65 x 50 mm measuring Distance: 50 ... 1000 mm Resolution: 10 μm
response time: < 2,5 ms	Output: 4 ... 20 mA 0 ... 10 V
Specific Characterstics	Missing measurement signals or incorrect measurements are suppressed

OADM 21
	Characterstics : High resolution at large measuring distance Measuring range can be limited Spot or line laser beam	Dimension: 20,4 x 135 x 45 mm measuring Distance: 100 ... 1000 mm Resolution: 10 μm
response time: < 5 ms	Output: 4 ... 20 mA 0 ... 10 V
Specific Characterstics	An alarm output indicates an incorrect measurement or if the object is outside of the measuring range Input for synchronizing measurements Laser diode can be switched on/off

OADM 250
	Characterstics : High resolution Measurement up to 4 m independent of colors Alarm output Measuring range can be limited	Dimension: 25,4 x 66 x 51 mm measuring Distance: 0,5 ... 4 m Resolution: 1,2 mm
response time: < 10 ms	Output: 4 ... 20 mA 0 ... 10 V
Specific Characterstics	An alarm output indicates an incorrect measurement or if the object is outside of the measuring range

OADM 260
	Characterstics : Large measuring range up to 13 m Alarm output Measuring range can be limited	Dimension: 25,4 x 66 x 51 mm measuring Distance: 0,5 ... 13 m Resolution: 5 mm
response time: < 10 ms	Output: 4 ... 20 mA 0 ... 10 V
Specific Characterstics	An alarm output indicates an incorrect measurement or if the object is outside of the measuring range

OADM 260
	Characterstics : Large measuring range up to 13 m Alarm output Measuring range can be limited	Dimension: 25,4 x 66 x 51 mm measuring Distance: 0,5 ... 13 m Resolution: 5 mm
response time: < 10 ms	Output: 4 ... 20 mA 0 ... 10 V
Specific Characterstics	An alarm output indicates an incorrect measurement or if the object is outside of the measuring range