Benefits of SYEMCO^® Products :

• Reduces Electrical and Mechanical Stresses to the machines/electrical installations.
• Eliminates Transient / reduces dip in Electrical Installation.
• Avoids motors burning as motor is connected in Delta from the starting itself.
• Power saving as compared Power Savings as compared to Star Delta Starters.
• Withstand high initial starting torques with MD Control.
• Ideally suitable for high friction and torque applications as loads are connected to DG/Turbine power supplies.
• Additionally we are using solid copper mains; hot tinned at ends duly glass coated thus avoiding heating at joints and joints in the mains.
• Reduced transmission losses as only 3 cores are required and use of reduced wattage contactors.
• Unity Power Factor can be maintained through our controller.
• Improve Motor life: As motor is connected in delta, motor and its winding life is improved.
• Reduces initial capital cost; requires one cable to run the motor.
• Zero Maintenance: Requires no maintenance. Even the oil compartment is completely enclosed so there is no chance of contamination.
• Starter Protection: The Transformer is isolated from both the ends after the changeover to enhance protection.
• Customized design: Designed as per requirements after analyzing the speed – torque characteristics.
• Excellent Workmanship:
• • Uses solid joint-less and manually forged cabling.
  • Cabling is tinned and duly Glass insulated.
  • Use of High quality MS Enclosure.
• Better Intermittent Duty Cycle:
• • The Starter provides better IDC (No. of start-stops per hour) as compared to soft starters. Wide Control Voltage Band:
  • Wide range of working Control voltage – 280 V to 480.
• Proven and Technically Advanced: Because of all the above points our starters are easy to use, technically advanced, attain high torque and require practically no maintenance and everything incorporated is front operated.

Comparision Chart

Parameters	Star – Delta Starters	Electronic Soft Starters	Conventional ATS	SYEMCO ® Make
Open transition	Yes	No	Yes	No
KORNDORFER Closed transition principle	No	No	No	Always
MD control	No	Yes	No	Yes
Electrical Stresses during change over	Much more stresses are there	Yes	Yes	No stresses
Mechanical Stresses during change over	Much more stresses are there	Yes	Yes	No stresses
Suitable for high frictional loads	Not very suitable	Not at all suitable	Yes	Very suitable
Suitable for high inertia loads	Not very suitable	Not at all suitable	Yes	Very suitable
Suitable for loads connected to DG / Turbine Power	No	No	Yes	Very suitable
Dip in Electrical installation	Much more	Yes	Yes	No
Motor burning	Chances are very high	Yes	Yes	Practically no motor burning
Provides Harmonics	No	Harmonics are present	No	Never
Power Saving	No	Yes	Yes	Yes
Electrical & Mechanical life of components	Low due to stresses	Low due to stresses	Low due to stresses	Very high
Joint less copper MAINS duly glass coated	No	No	No	Always
Recyclable	Yes	No	Yes	Yes

Applications of SYEMCO® Products :

« Pumpsets :
Centrifugal, Vertical Turbine , Multi -Stage , Submersible Pumps, Monoblock Pumps etc.

« Inertia loads :
Centrifugal Blowers , I.D. Fans , F.D. Fans , Pulverisers, Ball Mills, Cement Grinding Mills , Fly Wheel Loads , Rolling Mills , Stone Crushers etc.

« Friction loads :
Expanders, Oil Experllers, Extruders , Dall Mills Rolls, Rubber Mixing Mills , Amonia Compressors , Air Compressors , Cookers , Tosters , Hammmer Mills, Disintegrators, Flour Mills, Cotton Ginning Press, Sigma Machines , Flakers etc.