3 Wheeler Drum Trolley
A 3 wheel drum trolley is a simple shifting equipment for inclined handling of closed top or partially filled open top drums.
The capacity ranges from minimum to 500 kgs.
A single person can easily load the drum and shift the load with ease.
Rigid in construction.
Spares readily available.
Almost zero maintenance cost.
Low initial cost.
Front Dumper
Front dumper is a drum lifting and dumping equipment.
Capacity ranges from minimum to 500 kgs.
In this dumper the drum is clamped to the cradle of the dumper at the ground level and can be lifted to a desired level to dump the material in a hopper or a vessel. The dumping in this type is in the front of the operator.
Drum can tilt upside down through 180 degrees and can be held tilted at any angle.
Available in stationary as well as mobile modes.
Rigid in construction.
At any height the material in the drum can be dumped by the operator standing on the ground level.
Rear Dumper
In this type of dumper the material from the drum is dumped at the rear side.
Available in stationary as well as mobile modes.
The dumping mechanism in this dumper is purely mechanical. The drum carriage is designed in such a manner that as the drum reaches a desired dumping level the drum starts tilting backward to dump the material in the hopper/vessel.
Tilting angle 40 degrees between drum axis and horizontal.
Capacity ranging from minimum to 500 kgs. With lift upto 4 metres.
Stainless steel pouring lip of full stainless steel GMP models available.
Rigid in construction.
Low operating and maintenance cost.
Drum Stacker With Auto Gripper
The drum stacker with auto gripper grips the drum automatically without touching the drum, and stacks the drum at a desired level. While unloading also the drum unlocks automatically from the auto gripper.
Can be used with both standard M.S. drums and plastic drums.
Rigid in construction.
Low operating and maintenance cost.
Compact design.