1302, Dharani Arcade, Anjurphata, Bhiwandi-421305, Dist. Thane, Maharashtra

...

PHASE SELECTOR

  • Technical Specification Part 1
  • Technical Specification Part 2
    • A) Selects one phase out of three phase. Priority to 1st then 2nd then 3rd.
    Input voltage Range Narrow 165V-265V
    Width  120V-28V
    Display – 7 segment LED display for
    – three input voltages & output current
    – LED to indicate phase
    – present /out of range, load
    – connected to output, selected
    – input voltage range
    Selection Mechanism By Static Switch
    Capacity 5H.P. to 50H.P.
    DC Voltage 48V-180V
    Type of Batteries SMF 18AH-42AH
    Charging current 2Amps
    Signal In One Potential free
    Signal Out One Potential free  NO/NC
    No load shutdown power failure After 180 seconds to avoid battery deep discharge
    Single Phase Preventer Standard
    Bypass Electro mechanical Switch
    Indications
    1.   Visual(LEDs) Mains ON, Inverter ON, Overload, Charging ON, Battery Low
    2.   Audio Inverter Start, Overload Trip, Battery Low, Early Warning.