Products

KORRO-POL SINGLE PACK ROAD MARKING PAINTS
SAILENT FEATURES These Road Marking Paints have very good Drying Time. They have very good Durability& Water Resistance.
RECOMMENDED USES These Road Marking Paints are used for Demarcations on road.
DIRECTION FOR USE Adequate Surface Preparation and proper application is of Particular importance for achieving proper finish and Adhesion. Make sure that the Surface / Substrate to be painted should be free of Oil, Dust, Grease or any other foreign particles to get optimum adhesion & Finish. It Is necessary that the surface should be thoroughly cleaned either by scraping or wire brushing.
TECHNICAL SPECIFICATION
Sr. No Tests Specifications
1 Skinning / Settling No Skinning, Nil or Soft Settling
2 Supply Viscosity 80 + 5 Sec @ 30°C OR as per customer specification
3 Application By Brush
4 Finish Smooth, Uniform & free from Pin Holes & Orange Peels.
5 Colour As per ISC Shade Card, As per RAL Shade Card OR as per Customer Requirement.
6 Fineness of Grind 7 + Microns on Hegman Gauge
7 Drying Time Surface Dry – 20 – 30 Min
Tack Free – 1 – 2 Hrs
Hard Dry – 6 – 8 Hrs
8 Gloss Egg Shell Gloss. Semi Glossy to Full Gloss.
9 Specific Gravity 1.05 + 0.1 Kg/Lit
10 Solid Content Min 60 %
11 Theoretical Covering 5 – 6 M²/Lit
12 Flexibility & Adhesion No Such Scratch as to show bare metal
13 Water Resistance Film shall not show signs of blisters after 24 Hours of immersion in water.
14 Flash Point Not below 30°C
15 Shelf Life 6 Month in a Sealed Condition from the date of Manufacturing.
HEALTH & SAFETY
SAFETY PRECAUTIONS • As a general rule, avoid skin and eye contact by wearing overalls, gloves, goggles, and air mask etc.
• Spillage on skin should immediately be removed by thorough washing with water and soap or suitable cleaner.
• Eye should be flushed with fresh water.
• Avoid inhalation of vapors and paint mist by wearing suitable air mask.
• In the event of ingestion and eye contact, seek medical attention immediately.
• Painting must be carried out in well-ventilated area.
• This as industrial product contains flammable materials and should be kept away from ignition sources; local safety regulations should be followed.
STORAGE & HANDLING
STORAGE Store the paint in proper storage conditions as per the local regulations. Keep the paint container in sealed conditions under shed, away from direct sunlight and extreme temperature. Do not stock paint material near to any ignition sources. Do not put back the half or unused material back in original container, containing the supplied paint, to avoid contamination. Handle with care. Stir well before use.