Electronic Vibration Switch Is Designed As Direct Replacement Of Mechanical Vibration Switches.

These Mechanical Switches being used in yester years have very little merit and served the purpose when the requirement was not stringent. As they rely on large impacts or inertia (both acceleration): they do not respond to gradual increase in vibrations. Nuisance tripping during start-up is an usual problem. Further, sensitivity adjustment is too ambiguous to offer any meaningful translation.


Low Oil Level Switch for Gear Box

» Supply : 110 or 220 V AC +/- 10%; or 24 V DC
» Sensor : CAPACITANCE TYPE
» Range : 10mm
» Contact : One N/O + One N/C Potential free 220 V max / 220 va max / 5A max

Oil level of the gear box is an important parameter to be monitored. Damages expected due to low oil level are obvious and need not to be elaborated.

Old float type switches rely on buoyancy of the oil which changes with the impurities in the oil. Trip level also depends on the strength on the magnet used and needs adjustment for the individual piece.

In ACD switch, the sensing element is Capacitance Sensor whose performance is highly consistent, such that all the parameters can be precisely factory set and no in-situ adjustments are necessary.

The switch is designed in a weatherproof enclosure confirming to IP 65. (can be supplied in Flame Proof enclosure)