Compressed Air Filter / Moisture Seperator
Newly developed "Liquid Super Separator" is a new concept of a pneumatic mist remover without filter element. The "Element Free Pneumatic Water Separator" uses a special centrifugal technique with "radial multi-nozzles" that is world patent pending and makes it possible to reject liquid mist (water and oil) to 99.9%! This pneumatic mist separator is virtually maintenance free, as there is no need to replace any filter element. A standard traditional filter with an element and automatic drain may be placed downstream to control micron size but the high liquid and mist removal of the separator will keep it clean and it may not require element replacement for an extended period of time. Maintains extremely low pressure drop.

Rigid Flex Hose
The unique Nex Flow™ Rigid Flex Hose is an all stainless steel hose that does not break after a few bends like competitive rubber hoses with simple copper inserts. It is resistant to creep and crimping. The Nex Flow™ Rigid Flex Hose is used to flex, direct and then hold in place air nozzles, air jets and other small blow off products. May also be used for liquid spray jets. Its all stainless steel construction allows its use in any difficult environment. The rigid flex hose is available in three different sizes – 6", 12" and 18" and in two configurations - 1/4" male NPT welded end connection both ends or 1/4 male NPT welded connection one end and female NPT welded connection other end.

PART NO.	DESCRIPTION
6RF connections	6” overall length – ¼” NPT male to ¼” NPT male
6RF – MF connections	6” overall length – ¼” NPT male to ¼” NPT female
12RF  connections	12” overall length – ¼” NPT male to ¼” NPT male
12RF – MF connections	12” overall length – ¼” NPT male to ¼” NPT female
18RF  connections	18” overall length – ¼” NPT male to ¼” NPT male
18RF – MF connections	18” overall length – ¼” NPT male to ¼” NPT female

Magnetic Base
The Nex Flow™ Magnetic Base is used where the air operated products is required to be frequently moved. The extra strong magnet allows for flexible mounting, whether vertical or horizontal. Optional mini shut-off valve can be supplied.

Electronic Temperature Control For Panel Coolers
Electronic Thermostat ELC (Electronic Control Digital Thermostat) is a way for precise control of one or two Nex Flow™ Frigid-X™ panel coolers.

• Supply Voltage: AC120/240V
• Sampling Rate: 4/sec (almost double that of nearest competitor)
• Accuracy: 0.2% of full scale (under 10% of a degree)
• 3 Outputs: Two relay outputs and one with PID, 1SSR output with PID to control external SSR
• 50° to 100°C measuring range
• It has two Alarm settings for the two output relays so you can set two different temperatures to control two different solenoids for two separate coolers (and can be used to control anything electrical)
• AutoTune Mode for quick set ups
• NEMA 4 Enclosure (ASS/PC), ULC approved - it is accepted anywhere in the world - Lexan door: U94-V-0
• Standard unit comes with one solenoid valve, but it can operate two units and also complete additional tasks
• °F or °C and easily switchable back and forth.

Manifolds
Easy to assemble and mount for use with Nex Flow™ blow-off nozzles, jets and Air Edger™ flat jets for blow of various lengths. Nex Flow™ Manifolds are a convenient way to mount rows of multiple nozzles, air jets and other small blow off products to dry, clean or cool wider surfaces. Come complete with mounting holes.

Mounting Systems
Nex Flow™ Mounting Systems for air knives and air amplifiers provide a convenient and flexible way to utilize the products for blow-off and cooling applications. All Mounting Systems are made of powder coated steel. One knob controls the infinite flexibility of the system and secures it in place after the air knife or amplifier is properly positioned. Optional magnetic base can secure it to a magnet accepting platform. Rugged and secure positioning.