Vortex Tube

We are a leading Manufacturer & Trader of Vortex Tube such as Frigid-X Adjustable Spot Cooler, Vortex Tubes Stainless Steel - Frigid-X and Frigid-X Mini Spot Cooler from India.

Frigid-X Adjustable Spot Cooler
Adjustable Spot Cooler - Frigid-X™ is a low cost and maintenance free Adjustable Spot Cooler system which utilizes a vortex tube to produce cold air at one end. Adjustable Spot Cooler - Frigid-X™ temperature can be adjusted using a knob at the hot end to set the temperature precisely to your requirements. Temperatures range from approximately minus 30ºF to room temperature and can be easily set with a thermometer. Adjustable Spot Cooler - Frigid-X™ comes with three brass generators for flow rate adjustment - 15 SCFM (425 SLPM), 25 SCFM (708 SLPM) and 30 SCFM ( 850 SLPM) providing refrigeration up to 2100 BTU/hr (615 Watts). All Metal Parts, Stainless Steel Body, Quiet - Under 70dBA, Tests Show Frigid-X™ is Constantly Quieter Than Competition! Sub-zero cold air temperatures from an ordinary compressed air supply for spot air cooler applications where adjustability is important! Cold air is directed using the flexible tubing. A magnetic base is standard for portability and easy mounting of the adjustable spot cooler. Units are available with either a single point hose kit for small surface areas, Adjustable Spot Cooler or a dual point hose kit when heat is generated over a larger surface area. Adjustable spot cooler can produce a wide range of airflow and temperature by adjusting the knob at the hot end and changing the various generators supplied. The generators control the air consumption and are easily interchangeable. Adjustable spot cooler has a 25 SCFM (708 SLPM) generator installed that will produce up to 1,800 Btu/hr. of cooling. If less is required, the 15 SCFM (425 SLPM) generator can deliver 1,100 Btu/hr. If more cooling is needed Nex Flow™ can supply you with the 30 SCFM ( 850 SLPM) generator for up to 2,100 Btu/hr. of cooling.
Adjustable Spot Cooler - Frigid-X™ Features :

  • No moving parts or electricity
  • Compact and lightweight
  • Low cost
  • Maintenance free
  • Instant cold air
  • Quiet
  • Magnetic base
  • Interchangeable generators

Vortex Tube
Vortex Tubes are devices that work on a standard compressed air supply. Nex Flow™ stainless steel Vortex Tube uses a metal (brass) generator as a standard item rather than cheap plastic for longer life and for applications in high temperature environments. We are leading manufacturers and suppliers of quality and effectively useful Vortex Tube which can help you in the production of cold air by using compressed air. Vortex tube can manage and altered the temperature as per the requirement of the machinery. Basically the mechanisims is such that: - Air enters the vortex tube tool and splits the air flow into two airs as the cold air and hot air without moving any part. Our vortes tubes are made up of best quality aluminum and brass, which makes it efficient in high temperature.

Features of Vortex Tube:

  • Effective in high temperature
  • Best quality raw material used
  • Uses only compressed air

Vortex Tubes Stainless Steel - Frigid-X
Two sizes with a wide range of cooling capacity and temperature range. Our Vortex Tube is a tool that can take normal compressed air and convert into two air streams. One stream is hot air and the other stream is cold air. The advantage of our Vortex Tube is that it has no moving parts , which translates into no maintenance. The cold air can be adjusted down to -50 degrees Fahrenheit, and the hot side can be adjusted up to a temperature of 250 degrees Fahrenheit. Vortex Tubes are devices that work on a standard compressed air supply. Air enters the Vortex Tube and literally splits the air flow into two parts - cold air at one end, and hot air at the other - all without any moving parts.

    Vortex Tube Advantages
  • No moving parts, reliable, maintenance free
  • No coolant
  • Compact and lightweight
  • Low cost application
  • Maintenance free units
  • Instant cold air in environmental chambers
  • No spark or explosion hazard
  • Interchangeable generators
    Applications For Vortex Tubes
  • Cool electronic and electrical control
  • Cool machine operations/tooling
  • Cool CCTV cameras
  • Set hot melt adhesives
  • Cool soldered parts
  • Cool gas samples
  • Cool heat seals
  • Cooling environmental chambers

Frigid-X Mini Spot Cooler
Mini Spot Cooler - Frigid-X™ Mini Spot Cooler is a low cost and maintenance free system which utilizes a vortex tube to produce cold air at one end. It is quiet and compact. Mini Spot Cooler - Frigid-X™ Mini Spot Cooler is designed for small parts and produces a stream of 15 to 20 degree F (minus 9.5 to 7 degree C) of cold air to prevent heat buildup depending on inlet air temperature. It can improve tolerances in maching of small critical parts and increase production rates. Cold air is directed using the flexible tubing. A magnetic base is standard for portability and easy mounting of the Frigid-X™ Mini Spot Cooler.