Accelerators

Product Name	Functions	Appearance	Melting Point	Dosage (Phr)	Advantages	Technical Product Data Sheets
Pentocure – MBT	Accelerators	Off white to creamish Powder	175-1850C	0.5 - 1.5	It is a semi ultra fast accelerator for NR, SBR, BR, NBR and other highly unsaturated diene rubbers. It also acts as a retarder in CR based compounding formulations. It used alone it exhibits comparatively lower tensile properties and resilience.
Pentocure – MBTS	Accelerators	Creamish to Greyish Powder	172-1800C	0.5 - 1.5	It has a long curing range and is safer than Pentocure – MBT at rubber compound processing temperatures. It accelerated compounds exhibit very good tensile and resilience properties when used in combination with other booster accelerators.
Pentocure – F	Accelerators	Light creamish to creamish Powder	1400C Min.	1-2	It is a semi-ultra fast accelerator blend for NR, SBR, BR, NBR and other highly unsaturated diene rubbers. Pentocure – F accelerator based cure systems can be further boosted using small proportions of TMTM / TMTD to improve the rate of cure with considerable compromise on scorch and reversion resistance particularly if dithiocarbamate accelerators are used as boosters.
Pentocure – ZMBT	Accelerators	Light yellow to yellow Powder	3200C Min.	0.5 - 3.5	It is a semi-ultra fast accelerator for NR, SBR, NBR, BR and other diene rubbers. It is mainly used in latex compounding along with Pentocure – ZDC/ Pentocure – ZDBC to improve the state of cure. It offer excellent heat resistance to NR rubber vulcanizates in High accelerator-low sulphur cure systems.
Pentocure – CBS	Accelerators	Creamish to white Powder/Granules	98 - 1040C	0.5 - 5.0	It is an accelerator with delayed action sulphenamide for NR, SBR, BR, NBR and other sulphur / sulphur donor cured diene rubbers. It is very active above curing temperature of approx. 140°C and hence offers very good scorch safety during rubber compound processing operations (e.g. extrusion, calendaring, etc.) and improves the storage life of processed rubber stocks as compared to thiazole accelerators.
Pentocure – NOBS	Accelerators	White to creamish Powder/Granules	80 - 900C	0.5 - 1.5	It is a delayed action sulphenamide accelerator for NR, NR-BR blends, NR-SBR blends and other highly unsaturated synthetic rubber based compounds It exhibit excellent shelf life and retention of cure activity on prolonged storage as compared to other sulphenamide accelerators in rubber compounds.
Pentocure – TBBS	Accelerators	Off white to White Powder/Granules	105 - 1150C	0.5 - 4.0	It is a delayed action sulphenamide accelerator for NR, SBR, BR, NBR and other sulphur / sulphur donor cured diene rubbers. It exhibits very good storage stability as compared to other sulphenamide accelerators and Pentocure – TBBS Granular form disperse easily in rubber compounds. It is very active above 140°C, and it offers better scorch safety as compared to Pentocure – CBS.
Pukhocure – TMTM	Accelerators	Yellowish to light yellowish Powder	104 - 1120C	0.5 - 1.5	It cause very rapid and scorch safe vulcanization of natural & synthetics rubbers. Recommended in natural, SBR, butyl, nitrile and neoprene rubbers. For low set SBR system a combination of 1.0 phr ofPuhkocure - TMTM with 2.0 phr of DTDM and 1.0 Phr of CZ/CBS gives excellent results. Sulfenamide levels can be reduced by 0.3 phr for each 0.1 Phr or Pukhocure - TMTM to give equal states of cure.
Pukhocure – TMTD	Accelerators	White to creamish Powder	145 - 1530C	0.5 - 1.5	IT is used as a primary or secondary (ultra) accelerator in multiple blend accelerator systems with thiazoles and sulfenamides. It offers fast vulcanization and gives an excellent vulcanization plateau with good heat aging and compression set resistance when used in sulfurless vulcanization systems and EV systems.
Pukhocure – TMTD (Oil Coated)	Accelerators	White to creamish Powder	145 - 1530C	0.5 - 1.5	Oil coated Pukhocure – TMTD (Oil Coated) is also incorporate for dedusting purpose. IT is used as a primary or secondary (ultra) accelerator in multiple blend accelerator systems with thiazoles and sulfenamides. It offers fast vulcanization and gives an excellent vulcanization plateau with good heat aging and compression set resistance when used in sulfurless vulcanization systems and EV systems.
Pentocure – TETD	Accelerators	Off white to White Flakes/ Powder	69 - 730C	0.1 -2	It offers fast vulcanization and gives more scorch delay than Pentocure – TMTD. It gives an excellent vulcanization plateau with good heat aging and compression set resistance when used in sulfurless vulcanization systems and EV systems. It is also used as a vulcanizing agent (sulfur donor) in most of the sulfur cured elastomers and as a peptizing agent in sulfur modified polychloroprenes.
Pentocure – ZDEC	Accelerators	Off white to White Powder	1750C Min.	0.5 - 1.5	It is a very fast primary or secondary (ultra) accelerator for natural and synthetic rubber. It is a very rapid accelerator for NR and SBR lattices and also it is used as an antioxidant in adhesive systems. It can be used as primary accelerator in some continuous cure applications as well as in latex.
Pentocure – ZDBC	Accelerators	Off white to White Powder	104 - 1100C	0.2 - 2.5	It is mainly used as a non-blooming, non-staining ultra fast primary accelerator or as a booster accelerator in NR / Synthetic rubber latex compounds and dry rubber compounds for the manufacture of transparent / bright colored bloom free rubber products. It is a slower accelerator as compared to ZDMC / ZDEC at equal dosage due to its higher molecular weight in dry rubber compounds. It is effective in the absence of Zinc oxide and thus offers excellent transparency to finished products in NR latex based compounds.
Pentocure – ZDMC	Accelerators	Off white to White Powder	245 - 2500C	0.1 - 0.4	It is a very active non-discoloring, non-staining accelerator for NR, IR, BR, SBR, IIR and EPDM rubbers, as well as NR latex. It is very effective in EPDM because of it activity and, it may cause blooming in EPDM compound when used above 0.8 phr.
Pentocure – ETU	Accelerators	White to pale crystalline Powder	194 - 2040C	0.1 - 2.0	It imparts a high state of cure to neoprene compounds. It is an activator and secondary accelerator for low-sulfur or sulfurless vulcanization of other dienes rubber.
Pentocure – DETU	Accelerators	Off white to White Powder/Granule	75 - 800C	0.1 - 2.0	It is a non-discoloring, non-staining thiourea for high temperature curing of mercaptan-modified polychloroprenes, EPDM and CIIR. It is faster curing than Pentocure – ETU and has also been found to act as a retarder in clay-loaded peroxide- cured stocks. It is used as antioxidant for natural rubber, chloroprene rubber, nitrile rubber and styrene butadiene rubber.
Pentocure – DPTU	Accelerators	Off white to White Powder	145 - 1500C	1 - 2.5	It is a non-discoloring accelerator for polychloroprene, NR and CR latexes and EPDM sponge compounds. It used as secondary accelerator for CR, EPDM and other diene rubbers, aiming at a fast cure and a high degree of crosslinking with little sulfur or by means of sulfur donors.
Pentocure – DPG	Accelerators	Off white to White Powder	143 - 1490C	0.1 - 0.5	It is a secondary vulcanization accelerator, frequently used as activator. It is causing slight discoloration, its use in bright-colored rubber articles is recommendable only under certain conditions. It provides a very long scorch time and a relatively slow full cure.
Pentocure – DTDM	Accelerators	Yellowish to white Powder	120 - 1310C	1 - 2	It used under normal curing conditions liberates free sulfur which, in contrast to normal sulfur, mainly forms mono- and disulfide bridges and these are responsible for excellent heat aging resistance of the vulcanizates. It provides rapid cure rate with a long scorch safety. It is activated when used with Thiazole, Thiuram and Dithiocarbamate type accelerators. It is non-staining, non-discoloring, non-blooming and the master batch is easy to disperse.
Pentocure – DPTT	Accelerators	Light Creamish to Creamish Powder	115 - 1240C	0.5 - 2.5	It is a non-discoloring and non-staining accelerator. It is a very active sulfur-bearing accelerator and contains approximately 25% available sulfur. It used as ultra accelerator for the vulcanization of natural and synthetic rubbers and sulfur donor for vulcanization with low or no free sulfur. It imparts unusually good heat resistance to sulfurless compounds and may be used as a primary accelerator for Hypalon and Butyl as well as an excellent secondary accelerator for EPDM.