Un balance output :
Suitable for any type of load
IGBT based inverter:
Rugged design, can deliver 5 times peak output current, suitable for lift without A/C drive, Air conditioner & Industrial Loads
IGBT based SMPS battery charger :
Wide input voltage range
Low ripple dc charging current
Less heating of batteries so battery life improves
Automatic changeover Using 3 phase contractors:
No attendant required
Rating:
8 KVA TO 100 KVA
AC input:
415V + 15%, -20% Three Phase 4 Wire
Frequency:
50Hz + 6%
DC VOLTAGE:
120VDC TO 360VDC
Charging time:
15 Hours for 90% of full capacity
Charger type:
SMPS charger (IGBT Based)
Charging time:
15 Hours for 90% of Full Capacity
Inverter:
IGBT high frequency PWM
Change Over:
Electro Mechanical (Switch Contactor) — Provided as standard
Static Switch:
Optional
Technology:
IGBT, High Frequency PWM
Output voltage:
400V / 415V AC three phase
Voltage regulation:
+2% for DC I/P Variation & O/P Load Variation
Frequency:
50Hz + 1%
Waveform:
Pure sine Wave
Harmonic Distortion:
Less Than 3% for Linear Load
Inverter Efficiency:
>90% for 360 VDC, >85% for 180 VDC
Power Factor:
0.8
Over Load:
105% Continuously, 500% for 2 Sec.
Allowed Imbalance:
100%
Crest Factor:
4:1
Transient Response:
+ 4% under full load change & corrected within 60 msec
Phase displacement:
120º + 1º
Audible Noise:
Less Than 45db at 1 meter
Output overload & short circuit, Output Under & Over voltage, DC Under & Over Voltage input under & over voltage, single phasing & phase unbalance.
Mains on :
LED Indication
Inverter on:
LED Indication
Battery Low:
LED Indication & alarm
Input Under Voltage:
Mains LED slow blinking
Input Over Voltage:
Mains LED fast blinking
Output Over load:
LED Indication & alarm
Plus LCD display for Input Voltage, Output Voltage, Output Current, Battery Voltage & Battery Charging Current.
Elector Mechanical – (switch Contractor):
Provided as standard feature
Static Switch:
BI – Directional (Optional )