Lighting Controllers

TAS PowerTek offers a variety of Lighting Controllers which enables the customer to choose the most suitable model for their lighting and energy saving requirements. Our models include real time clock (RTC), facilitating Automatic switching (ON-OFF) of street lights as per user set timings or in-built sunrise - sunset time table (Applicable only in India).
The Light Controllers are compatible with Class I measurement accuracy. The controllers are SMART logic enabled for switching between full energy mode and energy saving mode. This optimises energy saving without hampering the performance of street lights.
Models offered are SLC-04, SLC-05 & SLC-06.

Salient Features :
SLC-04, SLC-05 & SLC-06.
Suitable for three-phase sensing applications.
Input sensing through line-to-neutral voltage with a CT.
Micro controller based DSP logic for measurements.
All measurements with Class 1 accuracy.
Data logging of interval records for 2 months.

Product Specific Features :
SLC-04:
Ideal for lighting applications where load is high (uses contactorised switching).
1 fixed-time schedule and 1 sun-time schedule for turn- on / turn-off of lamps
3 energy saving modes; reduced voltage tap selection, cutting 1 phase, cutting 2 phases.
User friendly PC software for data logging.

SLC-05:
Suitable for lighting applications with relay-switched load. Ideal for lighting of office and industrial premises.
Networking is possible over MODBUS protocol.
8 fixed-time schedules for turn-on / turn-off of lamps in a day.
Energy saving mode within each schedule - reduced voltage tap selection.
Intelligent PF correction with programmable value of step Kvar.
User friendly PC software for remote monitoring and control.

SLC-06:
Suitable for lighting applications where flexible voltage setting is required (uses motorised variac for voltage setting).
Networking is possible over MODBUS protocol.
8 fixed-time schedules for turn-on / turn-off of lamps in a day.
Energy saving mode within each schedule - setting reduced voltage.
Accurate setting of voltage across lighting load possible.
Intelligent PF correction with programmable value of step Kvar.
User friendly PC software for remote monitoring and control.