ANTI-WEAR TYPE
MAK HYDROL
MAK HYDROL grades are premium Anti-wear Hydraulic oils. They are blended from the Hydro processed base oils. They are fortified with very carefully selected anti-wear additives to satisfy the wide range of hydraulic equipment requirements. They have goof demulsibility and air release property. They meet the requirements of severe hydraulic system using high output pump as well as the critical requirements of other hydraulic system components such as close clearance servo-valves and the high accuracy numerically controlled (NC) machine tools.
Performance Level:
IS 3098: 1983 [Reaffirmed Sep. 2009]
IPSS: 1-09-022
IS 10522:1983 [Reaffirmed Sep. 2009]
Vickers V-104C Vane pump test
DIN 51 524 Part 1- HL Type
FZG Niemann test 9th FLs
Ours grades meet above specification for the respective viscosity grades.
Application:
These oils recommended for hydraulic system and a wide variety of circulating system of industrial and automotive equipments.
| Grade Name | K.V., cSt 40 ˚C | VI | Flash Point COC,˚C | Pour Point˚C |
|---|---|---|---|---|
| MAK HYDROL 12 | 12.2 | 103 | 184 | -15 |
| MAK HYDROL 15 | 15.3 | 105 | 186 | -12 |
| MAK HYDROL 22 | 22.6 | 105 | 200 | -12 |
| MAK HYDROL 32 | 32.6 | 106 | 220 | -12 |
| MAK HYDROL 37 | 37.3 | 106 | 224 | -12 |
| MAK HYDROL 46 | 46.7 | 106 | 226 | -12 |
| MAK HYDROL 57 | 57.2 | 106 | 234 | -12 |
| MAK HYDROL 68 | 68.1 | 104 | 238 | -12 |
| MAK HYDROL 81 | 81.4 | 104 | 246 | -12 |
| MAK HYDROL 100 | 100.2 | 102 | 248 | -12 |
| MAK HYDROL 121 | 121.1 | 102 | 252 | -9 |
| MAK HYDROL 150 | 150.5 | 100 | 256 | -9 |
| MAK HYDROL 176 | 176.5 | 100 | 260 | -6 |
| MAK HYDROL 220 | 220.1 | 95 | 264 | -6 |
| MAK HYDROL 320 | 320.4 | 95 | 268 | -6 |
| MAK HYDROL 460 | 460.6 | 95 | 272 | -6 |
MAK HYDROL AW
MAK HYDROL AW are premium anti-wear hydraulic oils which are blended from hydro processed base oils and carefully selected anti-rust, anti-foam, anti-oxidants and anti-wear additives. They are fortified with very carefully selected anti-wear additives which are very effective during very high and very low load working conditions. They also show exceptional hydrolytic stability and demulsibility and resist any deterioration due to water contamination. These oils are compatible with seals normally used in hydraulic system . MAK Hydrol AW is designed to work with system operating under severe conditions where high levels of anti-wear properties and high levels of anti-wear properties and high film strength are needed.
Performance Level:
IS 3098: 1983 [Reaffirmed Sep. 2009]
IPSS: 1-09-022
IS 10522:1983 [Reaffirmed Sep. 2009]
Vickers V-104C Vane pump test
DIN 51 524 Part 1- HL Type
FZG Niemann test 9th FLs
Ours grades meet above specification for the respective viscosity grades.
Application:
These oils are recommended for general hydraulic equipment in control and power transmission and for circulating equipments.
| Grade Name | K.V., cSt 40 ˚C | VI | Flash Point COC,˚C | Pour Point˚C |
|---|---|---|---|---|
| MAK HYDROL AW 32 | 32.2 | 105 | 220 | -12 |
| MAK HYDROL AW 46 | 46.5 | 105 | 226 | -12 |
| MAK HYDROL AW 68 | 68.3 | 104 | 238 | -12 |