Turbo
MAK TURBOL
These oils are formulated from hydroprocessed group || plus base oil and an additive system which provides an extremely high level of chemical and thermal stability, rapid and thermal stability , rapid and complete separation from water and a high resistance to emulsification. They provide excellent protection against rust and corrosion and also possess good anti-wear properties.
Performance Level:
IS 1012:2002 [Reaffirmed April, 2013]
DIN 51 515 part 1
GEK 32568A
Our grades meet above specification for the respective viscosity grades.
Application:
These oils are recommended in pressure circulation lube oil system in steam / gas / water turbines as prime mover for electricity generation. Used also for the lubrication of steam turbines which are used as prime movers in industries. And also for the lubrication of bearing of rotary / turbo compressors. They are highly effective in lubricating bearings prone to water contamination where demulsibility becomes a very important parameter selection of oil.
Viscosity Grade:
ISO VG : 32, 46, 68 & 100
Non ISO VG : 37, 57 & 78
| Grade Name | K.V., cSt 40 ˚C | VI | Flash Point COC,˚C | Pour Point,˚C |
|---|---|---|---|---|
| MAK TURBOL 32 | 32.9 | 110 | 228 | -15 |
| MAK TURBOL 37 | 37.3 | 110 | 240 | -15 |
| MAK TURBOL 46 | 46.5 | 110 | 246 | -12 |
| MAK TURBOL 57 | 57.4 | 108 | 252 | -12 |
| MAK TURBOL 68 | 68.8 | 106 | 256 | -12 |
| MAK TURBOL 78 | 78.5 | 104 | 258 | -12 |
| MAK TURBOL 100 | 100.7 | 102 | 260 | -12 |
MAK TURBOL AC
These oils are blended from specially refined paraffinic base oils which have exceptional thermal and oxidation stability. They have excellent demulsibility property and extremely low deposit / sludge foaming tendency. These oils are compatible with ammonia and display excellent oxidation stability in the presence of ammonia.
Performance Level:
IS 1012 : 2002 [Reaffirmed April, 2013]
Application:
Lubrication of ammonia and syn-gas centrifugal compressors.
MAK TURBOL AC 46 is approved by M/s BHEL for turbo machine being used in ammonia and syn gas services
Viscosity Grade:
ISO VG : 32, 46 & 68
Non ISO VG :57
| Grade Name | K.V., cSt 40 ˚C | VI | Flash Point COC,˚C | Pour Point,˚C | Ammonia Oxidation & Air Blow Test |
|---|---|---|---|---|---|
| MAK TURBOL AC 32 | 32.9 | 110 | 228 | -15 | Passes |
| MAK TURBOL AC 46 | 46.5 | 110 | 246 | -15 | passes |
| MAK TURBOL AC 57 | 57.3 | 108 | 252 | -15 | passes |
| MAK TURBOL AC 68 | 68.7 | 106 | 256 | -15 | passes |
MAK TURBOL EP
These oils, in addition to having properties of MAK TURBOL grades, have been specially formulated to satisfy the demanding requirements of modern high output steam turbines. These oils have higher FZG ratings and have been specially formulated to meet the
Performance Level:
IS 1012:2002 [Reaffirmed April,2013]
DIN 51 515 part 1 & 2
BS 489-1983
GEK 32568A
SIEMENS 0- 1130-0468-01
Brown Boveri HTGD 90117E
FZG Niemann test 10th FLS
Our grades meet above specification for the respective Viscosity Grades.
Application:
Lubrication of bearings of rotary / turbo compressors.
Viscosity Grade:
ISO VG : 32, 46 & 68
Non ISO VG :78
| Grade Name | K.V., cSt 40 ˚C | VI | Flash Point COC,˚C | Pour Point,˚C |
|---|---|---|---|---|
| MAK TURBOL EP 32 | 32.5 | 110 | 228 | -18 |
| MAK TURBOL EP 46 | 46.5 | 110 | 240 | -18 |
| MAK TURBOL EP 57 | 57.6 | 108 | 244 | -18 |
| MAK TURBOL EP 68 | 68.8 | 106 | 248 | -15 |
| MAK TURBOL EP 78 | 78.2 | 105 | 252 | -15 |