Soluble Cutting Oil
MAK SHEROL B
MAK SHEROL B is premium quality soluble cutting oil blended from high solubility mineral oil, emulsifiers and a Combination of performance enhancers. It forms an extremely stable milky emulsion when mixed with water.MAK SHEROLB demonstrates very high emulsion stability is observed even with extreme hard water (400 ppm).
Benefits:
Longer emulsion life
Better tool life and finish
Does not decompose chemically
Does not leave objectionable odour
Does not cause discoloration and staining of the work piece
Performance Level:
IS 1115:1986 [Reaffirmed April, 2013]
Application:
This soluble cutting oil is recommended for use in a variety of cutting operations on ferrous and non-ferrous materials .used at water to oil ratios between 20:1 and 30:1.
| Grade Name | K.V. cSt 40 ˚C | Emulsion Test,400 ppm Hard Water | Cast iron Corrosion (No. of pits/ area of staining-intensity of staining) | Frothing Test,200 ppm Hard Water |
|---|---|---|---|---|
| MAK SHEROL B | 30 | No oil / No cream | 0/0-0 | No froth |
MAK SHEROL EP-SS
AK SHEROL EP-SS is premium quality semi-synthetic soluble type cutting oil which possesses outstanding emulsion stability, corrosion protection even above 400 ppm hard water. it also possesses excellent anti-foaming properties. It has excellent biocidal properties leading to extended oil service life.
Benefits:
Hinders frothing
Gives very long emulsion life
Gives better tool life and finish
Does not decompose chemically
Does not leave objectionable Odour
Does not cause discoloration and staining of the work piece
Performance Level:
IS 1115:1986 [Reaffirmed April, 2013]
Application:
MAK SHEROL EP-SS is recommended for use on wide range of machining applications such as sawing, turning, milling, drilling, etc. Suitable for machining of both ferrous & non-ferrous metals including copper, aluminum and its alloys.
Recommended concentrations are as below:
A) Difficult Operation of materials 7 to 10%
B) General machining 5 to 7%
C) Grinding 3 to 5%
| Grade Name | K.V. cSt 40 ˚C | Emulsion Test,400 ppm Hard Water | Cast iron Corrosion (No. of pits/ area of staining-intensity of staining) | Frothing Test,200 ppm Hard Water |
|---|---|---|---|---|
| MAK SHEROL EP-SS | 68 | No oil / No cream | 0/0-0 | No froth |
MAK TRIPONOL
A range of active type, transparent, extreme pressure OIIS. This oils provides superior metal wettability and better cooling in sever operational conditions. These contain active Sulphur to provide additional EP properties. These oils are not recommended for use on yellow metals to avoid staining.
Performance Level:
IS 3065:1985 [Reaffirmed April, 2013] (for MAK TRIPONOL C)
MAK TRIPONOL B, D, H, R & HX are proprietary grades
Application:
These are recommended mainly for severe cutting operations on materials difficult to machine particularly though steels and are excellent for automatic lathes, screw cutting machines etc.
MAK TRIPONOL H is speciality oil for use in deep boring and gun drilling Operations
MAK TRIPONOL D gives better surface finish and improve§ gear cutting tool life coefficient Of Static friction reduces of grinding debris in form-grinding from being flushed of grinding surface
MAK TRIPONOL D is approved by M/s. TELCO in form grinding Operation and Gear Generation of straight Bevel Gears.
MAK TRIPONOL HX is developed for very heavy duty applications. They are chlorine-free and are intended for severe cutting operations especially on difficult to machine steels.
It is recommended for deep hole drilling, drilling, tapping, threading, milling, gear shaping, broaching, on hard materials.
| Grade Name | K.V. cSt 40 ˚C | Flash Point COC, ˚C | Saponification No. mg. KOH/g | Sulphur |
|---|---|---|---|---|
| MAK TRIPONOL B | 24.4 | 192 | 4 | Active |
| MAK TRIPONOL C | 35.2 | 195 (PMCC-166 ˚C) | 10 | Active |
| MAK TRIPONOL D | 31.4 | 195 | – | Active |
| MAK TRIPONOL H | 13.4 | 190 | – | Active |
| MAK TRIPONOL R | 12.5 | 187 | – | Active |
| MAK TRIPONOL HX | 18.7 | 192 | – | Active |
MAX SHEROL BN
MAK SHEROL BN is general purpose soluble cutting 0il blended from refined mineral , emulsifiers and performance additives.
MAK SHEROL BN demonstrates very high emulsion stability is observed even with extreme hard water(400 ppm)
Benefits:
Does not decompose chemically
Does not leave objectionable Odour
Does not cause discoloration and staining of the work piece
Performance Level:
18 1115:1986 [Reaffirmed April, 2013]
Application:
Soluble cutting oil application, to be used at water to oil ratios between 20:1 and 30:1.
| Grade Name | K.V. cSt 40 ˚C | Emulsion Test,400 ppm Hard Water | Cast iron Corrosion (No. of pits/ area of staining-intensity of staining) | Frothing Test,200 ppm Hard Water |
|---|---|---|---|---|
| MAK SHEROL BN | 23 | No oil / No cream | 0/0-0 | No froth |