Gear Compound
MAK CAMEX COMPOUND
Grade Available:
B, D, F, G & H
A range of high viscosity type lubricants fortified with special tackiness agents and bitumen. These grades normally require heating to facilitate application
Performance Level:
Camex Compound D/H : IS 9554:1980 [Reaffirmed Sept., 2009]
Camex Compound B/F/G : Proprietary grades
Application:
Lubrication of open gears, certain slow speed enclosed gears and other application where high viscosity adhesive products are required.
| Grade Name | K.V., cSt 100 ˚C | Flash Point COC,˚C | Pour Point,˚C |
|---|---|---|---|
| MAK CAMEX COMPOUND B | 120 | 238 | 24 |
| MAK CAMEX COMPOUND D | 230 | 252 | 24 |
| MAK CAMEX COMPOUND F | 120 | 238 | 27 |
| MAK CAMEX COMPOUND G | 770 | 260 | 30 |
| MAK CAMEX COMPOUND H | 1150 | 285 | 36 |
MAK CAMEX TAK 40
Specially developed bituminous for open gears of mining industries. Selectively chosen solvent enables The compound to get applied to gear teeth surface evenly. Once the solvent get evaporated it leaves a strong and tenacious film on the metal surface , which does not gets squeezed off even under severe working condition .The gear compound is fortified with suitable anti-wear additives to sustain heavy and shock loads encountered during usage.
Performance Level:
Proprietary grade
Application:
This Compound is recommended for use in open gears, working under heavy and shock loads under varying operating conditions.
| Grade Name | K.V., cSt 40 ˚C | Flash Point COC,˚C | Timken OK Loadlbs. |
|---|---|---|---|
| MAK CAMEX TAK 40 | 1582 | 204 | 45 |