Turbines Oil
MAK TURBOL
MAK TURBOL grades are formulated from hydroprocessed group II plus base oil an additive system which provides an extremely high level of oxidation and thermal stability in addition they are also fortified with anti-rust additive which provides excellent protection against rust and corrosion they also have the ability to release entrained air rapidly and also have excellent demulsiblity and resistance to foaming.
Performance Level:
IS 1012:2002 [Reaffirmed April, 2013]
DIN 51 515 Part1
BS 489:1983
GEK 32568A
0ur grades meet above specification for the respective viscosity grades.
Application:
Pressure circulation Lube Oil system in Steam / Gas / Water turbines as prime mover for electrical generation.
Lubrication of Steam Turbines used as prime movers in Industries.
Lubrication of bearings of rotary / turbo compressors.
Lubrication of bearings prone to water contamination where demulsibility becomes a very important parameter for selection of oil.
This grade can also be supplied in Super Clean (Typically NAS 7 at plant level) HDPE barrels.
Viscosity Grade:
ISO VG I 32, 46, 68 & 100
Non ISO VG : 37, 57 & 78
| Grade Name | K.V., cSt 40 ˚C | VI | Flash Point COC,˚C | Pour Point,˚C |
|---|---|---|---|---|
| MAK TURBOL 32 | 32.9 | 110 | 228 | -18 |
| MAK TURBOL 37 | 37.5 | 110 | 230 | -18 |
| MAK TURBOL 46 | 46.7 | 110 | 238 | -18 |
| MAK TURBOL 57 | 57.4 | 108 | 242 | -18 |
| MAK TURBOL 68 | 68.3 | 106 | 248 | -15 |
| MAK TURBOL 78 | 78.6 | 104 | 256 | -15 |
| MAK TURBOL 100 | 100.8 | 102 | 262 | -15 |
MAK TURBOL EP
These oils in addition to having properties of turbo grade have been specially formulated to satisfy the demanding requirements of modern high output steam turbines These oils have higher FZG and have been specially formulated to meet the requirements of geared turbines which required EP properties.
Performance Level:
FZG Niemann test 1001 FLS.
IS 1012:2002 [Reaffirmed April, 2013]
DIN 51515 Part1 &2
BS 489:1983
GEK 32568A
SIEMENS 0 1130-0468-01
Brown Boveri HTGD 90117E
0ur grades meet above specification for the respective viscosity grades.
Application:
It is recommended for gear turbine which requires extreme pressure properties.
This grade can also be supplied clean(Typically NAS 7 at plant level ) HDPE barrels.
These grade also recommended for lubrication of bearing of rotary /turbo compressor.
Viscosity Grade:
ISO VG : 32, 46 & 68
Non ISO VG : 57, 78
| Grade Name | K.V., cSt 40 ˚C | VI | Flash Point COC,˚C | Pour Point,˚C |
|---|---|---|---|---|
| MAK TURBOL EP 32 | 32.5 | 110 | 228 | -18 |
| MAK TURBOL EP 46 | 46.7 | 108 | 232 | -18 |
| MAK TURBOL EP 57 | 57.5 | 106 | 240 | -15 |
| MAK TURBOL EP 68 | 68.8 | 105 | 248 | -15 |
| MAK TURBOL EP 78 | 78.3 | 104 | 250 | -15 |